Eos (1F7) L4-2.0L Turbo (CBFA) (2008)
7 - Protective cap
‹› Pull onto brake carrier and guide pin.
8 - Brake pad with damper
‹› Supplied as pre-assembled replacement part with sufficient grease on guide pins.
‹› If protective caps or guide pins are damaged, install repair kit. Use supplied grease packet to lubricate guide pins.
9 - Protective cap
‹› Pull onto piston with outer sealing lip.
‹› Removing and installing, refer to => [ Brake Caliper Piston ] See: Overhaul.
10 - Piston with automatic adjustment
‹› Removing and installing, refer to => [ Brake Caliper Piston ] See: Overhaul.
‹› Apply thin coat of assembly paste (G 052 150 A2 ) to the piston before installing.
11 - Seal
‹› Removing and installing, refer to => [ Brake Caliper Piston ] See: Overhaul.