Eos (1F7) L4-2.0L Turbo (CBFA) (2008)
So that harness connector - 1 - can be disconnected, harness connector must be released from the retaining clip - arrow B -.
-
Release retaining clip as follows:
-
Press locking tab - 1 - in direction of - arrow A -.
-
Slide harness connector - 2 - upward - arrow B -.
-
Disconnect the harness connector by pressing securing button toward the cable and simultaneously pulling the harness connector apart.
-
Remove nuts - arrows A - and remove tail lamp toward rear out of side panel.