Eos (1F7) L4-2.0L Turbo (CBFA) (2008)
Evaporative Check Valve: Testing and Inspection
Double Check-Valve, Checking
Special tools, testers and auxiliary items required
‹› Hand Vacuum Pump (VAS 6213)
‹› Connector Test Set (V.A.G 1594C)
Conditions
‹› The Evaporative Emission (EVAP) canister purge regulator valve 1 (N80) was tested using the vehicle diagnostic tester and is OK.
-
Remove the engine cover carefully.
-
Remove the connector - 1 - and the ventilation hose - 3 - from the EVAP canister purge regulator valve 1 - 2 -.
-
Set the sliding ring - 1 - on the (VAS 6213) to the - A - position for "vacuum".
-
Connect the (VAS 6213) to the EVAP canister purge regulator valve 1.