Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
/l4-2.0l_turbo_(ccta)/Page-1192001.png)
Antenna Amplifier: Service and Repair
Antenna Amplifier
Removing
Before starting repair work, perform the following:
-
Switch off ignition, switch off all electrical consumers and remove ignition key.
-
Remove the rear lid trim.
-
Disengage connectors - 1, 2 and 3 - and remove them.
-
Remove screws - arrows -.
-
Remove antenna amplifier.
Installing
When installing, make sure that antenna connections in the rear lid - arrows - and bolts on antenna amplifier - arrows - are metallically clean so that
no contact problems occur.