Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
-
Always clean adhesion surface immediately prior to adhering outer door seal with adhesive removal solution D 002 000 10.
Let the adhesive remover dry completely.
‹› The adhesive surface must be free of dust, grease and adhesive residue.
Do not shape the seal beforehand.
-
Remove the film covering the adhesive and apply the seal to the door. Do not stretch or compress the outer door seal.
‹› Note adjacent seals - arrow -.
-
Press entire adhesive area of seal onto door all around using (3356).