Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
Rear Cross-Member: Service and Repair
Rear Suspension
Subframe
Subframe
Special tools, testers and auxiliary items required
‹› Engine/transmission jack (V.A.G 1383/A )
‹› Torque wrench (V.A.G 1332)
‹› Tensioning strap (T10038)
‹› Locating pins (T10096)
Removing
-
Remove wheels.
-
Remove coil springs. Refer to => [ Coil Spring ] See: Steering and Suspension/Suspension/Suspension Spring ( Coil / Leaf )/Service and
Repair/Coil Spring.
-
Remove the front and rear mufflers on the exhaust system.
-
On vehicles equipped with automatic headlamp range control, disconnect the connector - 1 -.
-
Remove ABS wheel speed sensor from wheel bearing housing.
-
Remove the bolt - arrow -.