Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
-
Remove side instrument panel covers. Refer to => [ Instrument Panel Side Covers ] See: Dashboard / Instrument Panel/Service and
Repair/Instrument Panel Side Covers
-
Remove center trim on A-pillar. Refer to => [ Center A-pillar Trim ] See: Center A-pillar Trim
-
Remove trim in area of mounting clip - 1 - inward from mounts - arrow A -.
‹› For the sake of illustration, securing elements - 1 - are depicted as removed in the illustration.
-
Loosen trim from door seal molding - arrows B -.
-
Remove trim from front mounts in instrument cluster - arrow C -.
-
Remove trim upward out of mounts - arrow D -.
‹› Before installing, inspect the securing clips for damage and replace if necessary.
Installing
-
Perform the steps used for removal in reverse order.
Center A-pillar Trim
Center A-pillar Trim
‹› Removal and installation is described for the right-hand side of the vehicle. Removal and installation for the left-hand side is performed in the
same manner.
Removing