Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
CAUTION!
When installing, ensure belt webbing is routed correctly, it must not be twisted!
-
Perform the steps used for removal in reverse order.
Lock Carrier Cover
Lock Carrier Cover
Removing
-
Position rear lid in service position.
-
Switch off ignition.
-
Remove floor carpet from luggage compartment.
-
Remove light in trim.
-
Remove both securing clips - 1 -.
-
Remove lock carrier cover - 2 - upward out of lock carrier.
Installing
-
Perform the steps used for removal in reverse order.
‹› Before installing, check securing elements for damage and replace if necessary.