Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
/l4-2.0l_turbo_(ccta)/Page-1419020.png)
Mirror With Rain Sensor
-
Remove switch unit and lights in roof crossmember trim.
-
Remove lower roof crossmember trim. Refer to => [ Lower Roof Crossmember Trim ] See: Lower Roof Crossmember Trim
-
Remove trim - 1 - in clip area - 2 - downward out of mounts in roof crossmember.
-
Pull trim - 1 - under A-pillar trim - 3 - out.
Installing
-
Perform the steps used for removal in reverse order.
‹› Before installing, check metal clips for damage and replace if necessary.
