Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
Trunk / Liftgate Lock: Service and Repair
Rear Lid
Rear Lid Lock
‹› If rear lid does not open, it can be opened by hand using the emergency release.
‹› The emergency release is behind the pass-through cover. Refer to => [ Rear Lid Emergency Release ]. See: Doors, Hood and Trunk/Trunk /
Liftgate/Service and Repair/Rear Lid/Rear Lid Emergency Release
Removing
-
Remove rear lid trim.
-
Remove anti-theft cover - 1 - from lid lock - 2 -.
-
Disconnect electrical harness connector - 4 - from lid lock - 2 -.
-
Remove hex nuts - 3 - and remove lid lock - 2 - from rear lid.
Installation
-
Install lid lock - 2 - on to rear lid and install hex nut - 3 -.