Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
-
Loosen the cables - 2 - on the glass panel - 1 - from the left and right slotted guide rails - 3 -.
-
Remove glass panel with slotted guide rail parallel out of rear guide rails - b arrows -. Raise front edge of glass panel slightly - arrow a -.
Installing
‹› Make sure all components such the slider and bracket are installed.
‹› The sliders - 6 - in the slotted guide rail - 8 - are coated in rubber up to the slider - 11 -.
‹› The washer - 9 - must fit exactly into the openings. The glass panel will make noises if the guiding edge is damaged.
‹› The lower brace - 12 - faces downward, as illustrated.