Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
-
Check rear dimension - b - of guide rails - 4 - with (VAS 6370).
-
Adjust guide rails according to front dimension - a - that was noted using (VAS 6370). Tighten the screw - 5 -.
-
Secure the gauge guide - 1 - in the guide rails - 4 -. Rotate knurled screw - 3 - so slit is vertical. Tighten knurled screw - 2 -.
‹› All screws are microencapsulated and must always be replaced.