Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
/l4-2.0l_turbo_(ccta)/Page-1511010.png)
-
Remove luggage compartment side trim.
-
Remove the rivet - 2 - and the sensor - 1/4 - from the body panel - 3/5 -.
When replacing sensor, disconnect wire - 3 - approximately 160 mm from sensor. After repairing wiring harness, wiring must be secured in harness
again.
Secure the rivets - 2 -.
