Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
-
Disconnect the brake lines - 1 - at the brake master cylinder and seal the lines with sealing plugs from repair kit Part No. 1H0 698 311 A.
-
Unscrew nuts - 2 - from main brake cylinder.
-
If present, remove heat shield.
-
Carefully take brake master cylinder out of brake booster.
-
Disconnect vacuum hose from brake booster.
For vehicles with manual transmission:
-
Remove the cable - 1 -, remove the mounting bracket - 2 - and lay it aside.
All Vehicles
-
Remove trim on driver's side..
Brake light switch is no longer present on mounting bracket from 11.06.05.
-
Disconnect the connector - 1 - from the brake light switch.