Volkswagen Workshop Service and Repair Manuals

‹› Only with the threaded version.

  6

Retaining Plate

‹› Only with the threaded version.

  7

Engine Coolant Temperature (ECT) Sensor (G62)

‹› Removing and installing, refer to =>  See: Engine - Coolant Temperature Sensor/Switch/Service and Repair.

  8

O-ring

‹› Always replace

  9

Coolant Pump

‹› Removing and installing, refer to => [ Coolant Pump ] See: Water Pump/Service and Repair/Coolant Pump.

‹› With a new coolant pump, remove the protective cap.

  10

Gasket

‹› Always replace

  11

Centering Sleeves

‹› Quantity: 2

  12

Toothed Belt

‹› For the coolant pump.

‹› Removing and installing, refer to => [ Coolant Pump Toothed Belt ] See: Water Pump/Service and Repair/Coolant Pump Toothed Belt.

  13

Toothed Belt Guard

  14

Bolt

‹› 9 Nm

  15

Bolt

‹› 10 Nm + 90° (1/4) additional turn.

‹› Always replace

‹› Left hand threads

  16

Toothed Belt Drive Sprocket

‹› Installed position: the collar on the drive gear faces the transmission.

  17

Shaft Seal

‹› Replacing, refer to => [ Coolant Pump Driveshaft Seal ] See: Water Pump/Service and Repair/Coolant Pump Driveshaft Seal.

  18

Balance Shaft

  19

Coolant Thermostat

‹› The coolant thermostat can be checked in "Guided Fault Finding" under "Function and Component Selection".

‹› Removing and installing, refer to => [ Coolant Thermostat ] See: Coolant Thermostat.

  20

Centering Sleeve