Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
-
Lift the chain tensioner locking wedge by inserting a scribe or a suitable screwdriver into the hole in the chain tensioner - direction of arrow 1 -.
-
Turn the crankshaft opposite the engine rotation direction - arrow direction 2 - and secure it using locking pin (T40011).
‹› The intake camshaft switches in the engine rotation direction.
-
Remove the bolt - 1 - and guide the tensioning rail - 2 - downward.
-
Remove the upper guide rail - 3 - by unlocking the latch located in the center with a screwdriver and pushing the guide rail forward.