Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
/l4-2.0l_turbo_(ccta)/Page-390005.png)
-
Check the marks on the intermediate shaft sprocket/balance shaft - arrow -.
‹› Due to the ratio, the mark align only every 7th turn.
-
Install the balance shaft timing chain. Refer to => [ Installing ] See: Balance Shaft Chain/Service and Repair/Balance Shaft Timing Chain.
The rest of the installation is basically a reverse of the removal sequence; when doing this, note the following:
-
Replace the coolant pump driveshaft seal. Refer to => [ Coolant Pump Driveshaft Seal ] See: Water Pump/Service and Repair/Coolant Pump
Driveshaft Seal.
