Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
/l4-2.0l_turbo_(ccta)/Page-402003.png)
-
Tighten the bolt to 9 Nm using torque wrench (0-60 Nm) (V.A.G 1783) and open end spanner insert AF 10 (V.A.G 1783/1).
‹› Tightening specifications, refer to => [ Timing Chain Covers Overview ] See: Timing Chain Covers Overview.
The rest of the installation is basically a reverse of the removal sequence.
