Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
/l4-2.0l_turbo_(ccta)/Page-403010.png)
1 - Tighten the bolts to 8 Nm
2 - Tighten the bolts an additional 45° (1/8) turn
‹› After installing the cover, allow the sealant to dry for approximately 30 minutes. Only after then may the engine oil be added.
-
Fill the engine oil.
-
Check the oil level.
The rest of the installation is basically a reverse of the removal sequence.
