volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Cornering Lamp|Service and Repair|Page 6796 > < Cornering Lamp|Service and Repair
Page 2
background image

‹› H8 12V, 55 W bulb.

‹› Replacing, refer to => [ Cornering Bulb, Valeo ] See: Headlamp/Service and Repair/Removal and Replacement/HID Headlamps.

‹› Checking, refer to => [ Vehicle Electrical System Control Module, Through 05.09 ] See: Power and Ground Distribution/Power Distribution

Module/Description and Operation/Vehicle Electrical System Control Module, Through 05.09.

5

Headlamp Housing Mounting Bolt

‹› 2.5 Nm.

‹› Manufactured by Valeo.

‹› Tightening specifications overview, refer to => [ Headlamps Tightening Specifications ] See: Specifications/Exterior Lights, Lamps and

Switches Tightening Specifications.

6

Left Headlamp Power Output Stage (J667) or Right Headlamp Power Output Stage (J668)

‹› Is attached to the housing cover => [ (Item 7) Housing Cover ].

‹› After installing a new headlamp power output stage, Headlamp Range/Cornering Lamp Control Module (J745) must be coded, refer to => [

Headlamp Power Output Stages, Coding ] See: Headlamp/Headlamp Control Module/Testing and Inspection/Headlamp Power Output Stages,
Coding and then basic headlamp setting performed.

7

Housing Cover

‹› The housing cover also serves to secure the headlamp power output module. 

‹› For Left High Intensity Gas Discharge (HID) Lamp ( L13) or Right High Intensity Gas Discharge (HID) Lamp (L14) ("Bi-Xenon")

‹› for Left Headlamp Beam Adjustment Motor (V48) and Right Headlamp Beam Adjustment Motor (V49)

‹› With seal.

-

Check the seal for damage.

-

Replace the housing cover if damaged.

8

Retaining Bracket

‹› For housing cover => [ (Item 7) Housing Cover ].

9

Wire For Gas-Discharge Lamp

‹› Between Left High Intensity Gas Discharge (HID) Lamp (L13) or Right High Intensity Gas Discharge (HID) Lamp (L14) and Left

High-intensity Gas Discharge Lamp Control Module (J343) or Right High-intensity Gas Discharge Lamp Control Module (J344)

10

Screws

‹› For Left Headlamp Beam Adjustment Motor (V48) and Right Headlamp Beam Adjustment Motor (V49)

‹› Manufactured by Valeo.

‹› 1 Nm.

‹› Tightening specifications overview, refer to => [ Headlamps Tightening Specifications ] See: Specifications/Exterior Lights, Lamps and

Switches Tightening Specifications.

11

Left Headlamp Beam Adjustment Motor (V48) and Right Headlamp Beam Adjustment Motor (V49)

‹› Headlamp manufacturer Valeo.

‹› Removing and installing, refer to => [ Headlamp Range Control Positioning Motor ] See: Headlamp/Service and Repair/Removal and

Replacement/HID Headlamps. 

Cornering Lamp|Service and Repair|Page 6796 > < Cornering Lamp|Service and Repair