Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
Fog/Driving Lamp: Service and Repair
Fog Lamp
Fog Lamp
‹› Illustrations depict removal and installation of right fog lamp.
Removing:
-
Cover - 1 - can be pulled out of catches e.g. using a wire bracket from the vehicle tool kit - 2 -.
-
Engage wire bracket into hole in cover and pull cover out of catches in - direction of arrow -.
-
Remove mounting bolts - arrows - (1.5 Nm).
-
Pull fog lamp housing out of bumper while paying attention to the lengths of the connected wires.
-
Disengage and disconnect harness connector - arrow -.