Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
/l4-2.0l_turbo_(ccta)/Page-1587001.png)
Horn: Service and Repair
Horns
‹› High Tone Horn (H2) and Low Tone Horn (H7) are activated in parallel by Vehicle Electrical System Control Module (J519).
‹› Removal and installation for High Tone Horn and Low Tone Horn is performed in the same way and is only described for one signal horn.
‹› Signal horns are installed at left and right in front of longitudinal members.
Removing:
-
Turn off the ignition and all electrical consumers.
-
Remove front bumper cover.
-
Disconnect electrical connection - 1 -.
-
Remove the nuts - arrows - (5 Nm) and remove signal horn.
Installing:
-
Install in reverse order of removal.
