Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
Drive Belt: Service and Repair
Ribbed Belt
Ribbed Belt
Removing
Risk of destroying due to reversed running direction of a used ribbed belt.
‹› Before removing the ribbed belt, mark the running direction with chalk or a felt-tip pen for reinstallation later.
-
Remove the noise insulation.
-
Remove the right charge air hose clamps - arrows - and hose.
-
To release the tension on the ribbed belt, rotate the tensioner in the - direction of the arrow - from underneath.
-
Secure the tensioner using (T10060 A).
-
Remove the ribbed belt.
Installing
Installation is performed in reverse order of removal, noting the following:
‹› Before installing the ribbed belt, the generator and Air Conditioning (A/C) compressor must be securely installed.