Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
Transmissions installed after September 20, 2004, have only one plug- A -.
-
Always replace sealing ring - arrow -.
-
Follow the sequence of each of the following instructions until the oil change is completed.
-
Connect vehicle diagnostic testing and information system (VAS 5051) and identify vehicle in Guided Functions.
-
Direct Shift Transmission
-
Check Oil Level
-
Engine off - do not start!
Only start engine when requested to do so. Not right now.
-
Place drip tray (VAG 1306) underneath transmission.
-
Connect Vehicle diagnostic testing and information system (VAS 5051) and press Check Oil Level in Guided Functions.
-
Slowly remove filter housing - arrow -.