Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
Fuel Pressure: Testing and Inspection
Fuel Pump Electrical, Testing
Diagnostic Procedures
Fuel Pump Electrical, Testing
Special tools, testers and auxiliary items required
‹› Multimeter.
‹› Electrical connector test lead set.
Test conditions
‹› Battery voltage 12.5 V.
‹› Fuse - 27 - in Fuse Panel C is OK.
‹› Fuel filter OK.
‹› Ignition switched OFF.
Test procedure
-
Perform a preliminary check to verify the customers complaint. Refer to => [ Preliminary Check ] See: Powertrain Management/Computers and
Control Systems/Testing and Inspection/Scan Tool Testing and Procedures/Preliminary Check
Start diagnosis
-
Remove rear seat bench Refer to the Repair Information.
-
Remove the Fuel Pump Control Module from the retaining clips on the floor sealing cover.