Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
-
Press off dust cap.
-
Remove brake carrier with brake caliper and hang on body with tie wire.
‹› Suspend brake caliper from body.
-
Remove the bolt and then remove the brake disc.
-
Remove multi-point socket head bolt using (T10162).
-
Pull wheel hubs/wheel bearing unit off stub axle.
Installing
-
Carefully slide wheel hub/wheel bearing unit onto stub axle.
Make sure that wheel hubs/wheel bearing unit do not cant!
-
Tighten using a new multi-point socket head bolt.