Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
-
Press straps on E-box bracket apart from each other - arrows C - and slide flat terminal housing - 2 - toward front - arrow D - out of E-box
bracket.
-
Remove the nuts - arrows - of E-box bracket - 1 -.
‹› It depends on vehicle equipment whether an auxiliary relay carrier is installed.
-
Pull E-box bracket - 1 - as far as the cable lengths of the auxiliary relay carrier permit upward from the stud bolts.
-
Unclip auxiliary relay carrier - 1 - sideways out of E-box bracket - 2 -.