Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
-
Tighten the bolts - 2 - in the hole on the ECM as far as the stop.
-
Secure the locking bracket to the ECM with new shear bolts - arrows -.
-
Tighten the shear bolts evenly until the bolt heads break off - arrows -.
-
Mount the ECM into the retaining frame and push it in the - direction of the arrow - upward.
-
Install the plenum chamber bulkhead.
-
Install the windshield wiper arms.