Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
Engine Speed Sensor: Service and Repair
Engine Speed Sensor (G28)
Removing
-
Remove the engine cover.
-
Open the charge air pipe hose clamp - 2 -.
-
Disconnect the electrical harness connector - arrow -.
-
Remove the noise insulation.
-
Remove the bolts - 1 and 4 - and remove the charge air pipe downward from the throttle valve control module (J338).
-
Remove the charge air hose clamp - 1 - from the charge air cooler and remove the charge air pipe downward.
-
Disconnect the electrical connector - 1 - from the engine speed sensor.