Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
-
Pull off the sizing sleeve (T10133/8) again using a turning motion in the opposite direction.
-
Replace the O-ring and support washer on the fuel injector.
Fuel Injectors
Fuel Injectors
Special tools, testers and auxiliary items required
‹› Tool Set (T10133)
‹› The puller (T10133/2) was changed. It is now called the puller (T10133/2A). If the new tool is not available, the old one can be modified.
Modifying Puller (T10133/2)
Special tools, testers and auxiliary items required
‹› Round file approximately 6 mm
-
File the semi-circle as shown in the illustration. The semi-circle allows the tool to slide farther onto the fuel injector, thus providing the tool with a
larger contact surface.
-
Mark the modified tool with an "A" at the end of the tool number.
Fuel Injector, Individual Parts