Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
Specified value: Battery voltage.
-
Switch the ignition OFF.
If the specified value was Not obtained:
-
Remove fuse 10 in Fuse Panel B. Check the Ignition Coil electrical harness connector terminal 1 to fuse 10 in Fuse Panel B for a short to ground
or an open circuit.
Specified value: 1.5 ohms Max.
If the specified value was Not obtained:
-
Check the wiring connection for an open circuit or a short circuit to Ground.
-
Check the wiring connection for damage, corrosion, loose or broken terminals.
-
If necessary, repair the faulty wiring connection.
If the specified value was obtained:
Checking activation
CAUTION!
Do not touch the Ignition Coils connecting parts or adapter cables during the following test.
-
Disable the power supply to the Fuel Injectors ( N30, N31, N32, N33) by removing Fuse 29 (on fuse panel B) from the fuse holder SB29, in the
E-box, plenum chamber.
-
Using a diode test lamp, check the Ignition Coil electrical harness connector terminals 2 to 3 for voltage.