Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
-
Remove the spark plugs, using spark plug removal tool (3122 B).
-
Check the compression using compression tester (V.A.G 1763) and adapter (V.A.G 1763/6).
‹› Using the tester, refer to the operating instructions.
-
Operate the starter until the tester no longer indicates that the pressure is increasing.
Compression Pressure:
-
Install the sparks plugs, tightening specification. Refer to => [ Ignition System Component Overview ] See: Ignition System/Service and
Repair/Ignition System Component Overview.
-
Install the ignition coils with power output stage. Refer to => [ Ignition Coils with Power Output Stages ] See: Ignition System/Ignition
Coil/Service and Repair.
‹› By separating the connections, Diagnostic Trouble Codes (DTCs) are stored to memory. After the test, check the fault memory and erase, if
necessary.
-
Read the Engine Control Module (ECM) DTC memory using the vehicle diagnostic tester.