Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
-
If present, disconnect front seat heating connector - 3 -.
-
Disconnect the black Seat Occupied Recognition Safety Belt Force Sensor (G453) connector - 5 -
-
Disconnect the yellow Front Passenger's Safety Belt Switch (E25) connector - 4 -.
-
If present, disconnect front seat backrest heating connector - 6 -.
-
Cut wiring harness cable ties - 2 -.
-
Slide white bracket - 1 - left and remove from seat frame.
-
Remove all connectors from bracket.
CAUTION!
Do not disconnect connector from Seat Occupied Recognition Control Module (J706).