Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
-
Disconnect side airbag connector - 8 -.
-
Remove cable bracket - 9 -.
-
If present, disconnect front backrest heating connector - 10 - and remove yellow connector.
‹› Do not remove white bracket.
-
Remove cable bracket - 11 -.
-
Remove front seat backrest. Refer to => [ Left Front Seat Backrest ] See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Front Seats
-
Remove cover from upholstery of front seat cushion (front seat cushion is not removed). Refer to => [ Front Seat Pan Covers and Upholstery ]
See: Body and Frame/Seats/Service and Repair/Overhaul/Seats - Upholstery, Covers/Front Seat Covers and Upholstery.
CAUTION!
Do not disconnect connector from Seat Occupied Recognition Control Module (J706).
-
Unclip pressure hose - 6 - from retainers.
-
Unclip Seat Occupied Recognition Pressure Sensor (G452) - 5 - from retainer, when doing this do not disconnect harness connectors - 3 - or - 4 -
at Seat Occupied Recognition Pressure Sensor (G452) and similarly at Seat Occupied Recognition Control Module ( J706) - 2 -.
-
Remove bolts - 1 - (1.5 Nm).