Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
Compressing crimp connections using (VAS 1978/1A), refer to => [ Wire Break with Dual Repair Point ] See: Service and Repair/Procedures/Wire
Break With Dual Repair Point.
The following exchangeable heads can be obtained for (VAS 1978/1-2):
‹› Exchangeable head 0.35 mm2 - 2.5 mm2 (VAS 1978/1-1)
‹› Exchangeable head 4.0 mm2 - 6.0 mm2 (VAS 1978/2A)
‹› Exchangeable head for JPT-terminal (VAS 1978/9-1)
In conjunction with (VAS 1978/9-1), crimp pliers are used to crimp terminals onto individual wires when repairing wiring cross-sections up to 0.35
mm2. Refer to => [ Wires with Diameter up to 0.35 mm , Repairing ] See: Service and Repair/Procedures/Wires With Diameter up to 0.35 mm 2,
Repairing.
Changing Exchangeable Head:
-
Open crimp pliers completely.
-
Disengage both locking pins - arrows - from crimp pliers basic tool.
-
Insert the required exchangeable head from above - arrow - in crimp pliers basic tool.