Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
CAUTION!
Do not press the clutch pedal after disconnecting the line.
Disconnect the hose/line assembly or plastic line from the breather as follows:
-
Disengage the circlip - 2 - with a screwdriver or a pointed tool and disconnect the line - 4 - with O-ring - 3 - from the breather - 1 -.
Installing
Install in reverse sequence; note the following points:
-
Install the hose/line assembly or plastic line - 1 - with a new O-ring - 2 - to the master cylinder connection - 4 - until the securing clip - 3 - engages
audibly.