Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
The upper nut - 1 - is accessible between the relay carrier and steering column trim.
-
Remove the mounting bracket - 3 -.
Installing
Install in reverse sequence; note the following points:
‹› Replace the self locking nuts.
‹› Replace the hose clamps.
There are different ways of securing the impact bolster - 1 - in front of the clutch pedal - 2 -.
Securing with two bolts
-
Install the impact bolster - 1 - and tighten the two bolts.
Securing with one bolt