Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
/l4-2.0l_turbo_(ccta)/Page-694002.png)
-
Remove the dual mass flywheel.
Installing
Installation is performed in the reverse order of removal, noting the following:
‹› Tightening specifications, see - item 6 - in => [ Sealing Flange and Dual Mass Flywheel/Drive Plate Overview ] See: Engine, Cooling and
Exhaust/Engine/Seals and Gaskets/Crankshaft Main Bearing Seal/Service and Repair.
-
Secure with new bolts.
-
Install (3067) into hole in cylinder block - A -.
