volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Differential Output Shaft, M/T|Service and Repair > < Final Drive, Differential (02Q Transmission)|Page 2700
Page 3
background image

-

Remove the transmission housing.

-

Pull the outer race/tapered roller bearing out of the transmission housing.

A Support, for example, (22/2)
B  Internal puller 46 to 58 mm, for example, (21/7)

-

Insert the shims of the correct thickness, thickest shim first.

The following shims are available:

If the size of shim required is larger than that listed in the table, two shims totaling the correct value can be installed. First the thicker adjustment shim
must be inserted for this.

Tolerance variations make it possible to find the exact shim thickness required.

-

Press in the outer race again and tighten the transmission housing bolts - item 13 -=> [ Bolt ] See: Service and Repair/Removal and
Replacement/02Q Transmission/Transmission Component Overview and -  item 14 -=> [ Bolt ] See: Service and Repair/Removal and
Replacement/02Q Transmission/Transmission Component Overview to specification.

Differential Output Shaft, M/T|Service and Repair > < Final Drive, Differential (02Q Transmission)|Page 2700