Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
-
Check adjustment dimension of side window with roof closed. Refer to => [ Door Window Adjustment Dimensions ] See: Door Window
Adjustment Dimensions.
Door Window, Adjusting Height to Roof Pillar Seal
‹› Side window is adjusted higher by rotating adjusting screw - 4 - on coupling plate to the right. Adjust lower by turning left.
‹› One rotation of the adjusting screw means a door window height adjustment of about 1 mm.
‹› The door and roof are adjusted. The roof is closed.
‹› The door window is adjusted in direction of travel and angle.
‹› Window regulator basic setting is performed, refer to => [ Window Regulator Basic Setting ] See: Service and Repair/Procedures/Window
Regulator Basic Setting
-
Remove cover caps on lower edge of door.
-
Lower door window completely.
-
Rotate adjusting screw - 4 - on coupling plate - 3 - until adjustment dimensions are reached, refer to => [ Door Window Adjustment Dimensions ]
See: Door Window Adjustment Dimensions.
-
Check adjustment of closed door.