Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
-
Position the window regulator motor - 1 - and pull door window up and down lightly so the splines are located better between the motor and the
cable drum.
Tightening specification for window regulator motor screws - 2 -: 3.5 Nm
-
Connect connectors - 3 -.
The window regulator loses its route after low voltage.
‹› The roof is closed.
‹› The door window is adjusted.
-
Let window regulator drive twice upward and downward to stop respectively. This ensures the window is ready for use. Pinch protection is
activated.
-
Continue by performing the steps used in removal in reverse order.
Window Regulator
Removing