Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
Headlamp Washer Spray Nozzle: Service and Repair
Spray Jet Telescoping Cylinder
Spray Jet Telescoping Cylinder
Removing:
-
Switch off ignition, switch off all electrical consumers and remove ignition key.
-
Remove spray nozzles with cover cap - 1 - up to stop out of bumper cover.
-
Unclip cover cap - 1 - from bearings - arrows - on spray nozzle holder.
-
Remove front bumper cover.
-
Pull off securing clip - 4 - from the hose connection.
-
Disconnect the hose connection from lift cylinder - 2 -.
-
Remove screw - 1 -.
-
Unclip lift cylinder - 2 - from bracket - 3 -.
Installing:
Install in reverse order of removal, noting the following:
-
The hose to lift cylinder must be clipped into hose bracket.