Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
-
Pull windshield washer pump - 4 - upward out of tank and disconnect harness connector - 2 -.
-
Pull Headlamp Washer Pump (V11) - 9 - upward out of the tank and disconnect harness connector - 10 -.
-
Remove the tank mounting bolts - arrows - and remove tank together with filler tube connecting pipe from vehicle.
Installing Tank For Windshield Washer System And Headlamp Cleaning System:
Install in reverse order of removal, noting the following:
-
Tighten all threaded connections - arrows - to 8 Nm.
Tightening specifications overview, refer to => [ Windshield Wiper/Washer System, Tightening Specifications ] See: Specifications/Windshield
Wiper/Washer System, Tightening Specifications.
Installing Filler Tube For Tank For Windshield Washer System And Headlamp Cleaning System:
Install in reverse order of removal, noting the following:
Casting mark on under side of filler tube must be inserted into engine mounting hole - arrow -.