Eos (1F7) V6-3.2L (BUB) (2008)
-
Then swivel mounting bracket out in direction of - arrow - and disconnect harness connector.
-
Disengage harness connectors - arrows - from antenna connections and disconnect them.
Installing
-
Insert connectors to radio navigation system and engage them.
-
Slide radio navigation system straight into instrument panel.
NOTE: While sliding in the radio navigation unit, under no circumstances press on the display or control buttons since the radio navigation unit
may be damaged by doing this.
-
Secure radio unit with 4 screws - arrows -.
-
Reinstall center console cover.
-
If necessary, deactivate anti-theft coding.
-
Check radio/navigation unit code and code radio unit again if necessary.
Radio unit coding see adapting components, radio.
Navigation unit code see Radio navigation system, adapting components.