Eos (1F7) V6-3.2L (BUB) (2008)
/v6-3.2l_(bub)/Page-2156001.png)
Convertible Top Cable: Description and Operation
Routing Tensioning Bands
Tensioned Headliner Tensioning Bands
Routing Tensioning Bands
‹› Always align eyes correctly according to instructions.
‹› When routing tensioning bands, ensure they do not rub against each other or other components.
‹› Mark and note routing of tensioning bands and positioning of eyes.
‹› If possible, remove only one side so the other side can serve as a pattern.
1
Bolt
‹› The screw is micro-encapsulated and must always be replaced.
‹› 3 Nm
2
Eye
‹› Moveable diverting eye for tensioning band.
‹› Different versions, with and without guide tab.
‹› - Arrow a - shows direction of eye on bolt points with marking.
