Eos (1F7) V6-3.2L (BUB) (2008)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
ABS/ASR/Mark 70 Control Module and Hydraulic Unit
Control Module and Hydraulic Unit (Mark 70 (ABS/ASR))
Special tools, testers and auxiliary items required
Torque wrench V.A.G. 1331
Torque wrench V.A.G. 1410
Brake pedal actuator V.A.G. 1869/2
Sealing Plug Repair Set, Part No. 1H0 698 311 A
After separating the control module from the hydraulic unit, always install transport protection on the hydraulic unit for the valve domes.
Warranties will not be granted for hydraulic units without transport protection.
1 - Transport protection for valve domes (foam)
2 - Sealing plug M 10
3 - Sealing plug M 12
The control module is bolted to the hydraulic unit and is located at right in the engine compartment.
Do not bend the brake lines near the hydraulic unit.
Read and note the present control module coding.
Note or request radio code on vehicles with coded radio if necessary.
Remove engine cover.
Release control module connector in direction of arrow - 1 - and pull off - 2 -.