Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Eos (1F7) V6-3.2L (BUB) (2008)

Brakes and Traction Control > Antilock Brakes / Traction Control Systems > Wheel Speed Sensor > Component Information > Service and Repair > Wheel Speed Sensor, Front Axle

Page 1
background image

Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor, Front Axle

Wheel Speed Sensor, Front Axle

Removing

-

Raise the vehicle.

-

Disconnect the wheel speed sensor wiring connector - 1 - from the sensor.

-

Remove the speed sensor bolt - 2 -.

-

Remove the wheel speed sensor.

Installing

-

Before installing the speed sensor, clean the bore inner surface and coat the speed sensor all round with hot bolt paste ( G 052 112 A3).

-

Install the speed sensor into the bore in the wheel bearing housing and tighten the bolt to 8 Nm.

-

Connect the speed sensor wiring connector.

Brakes and Traction Control > Antilock Brakes / Traction Control Systems > Wheel Speed Sensor > Component Information > Service and Repair > Wheel Speed Sensor, Front Axle

[PREV PAGE] [NEXT PAGE]