Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Eos (1F7) V6-3.2L (BUB) (2008)

Brakes and Traction Control > Disc Brake System > Brake Caliper > Component Information > Description and Operation > Brakes - Mechanical Components > Page 3964

Page 3
background image

1 - ABS wheel speed sensor

^

Before inserting sensor, clean inner surface of bore hole and coat with hot bolt paste G 052 112 A3

2 - Hex socket head bolt, 8 Nm

3 - Multi point socket head bolt, 90 Nm + 90 degree

^

Always replace after removal

4 - Wheel bearing housing

5 - Cover plate

6 - Hex head screw, 9 Nm/Torx screw 12 Nm

^

Hex head screw M6 x 10 changed from Torx screw M6 x 12

^

Replace hex head screw with hex head screw and Torx screw with Torx screw

7 - Wheel bearing/hub unit

8 - Brake disc

^

15 inches: 260 mm, 17 inches: dia. 12.20 in

^

Thickness 15 inches: 0.47 in, 17 inches: 0.87 in

^

Wear limit 15 inch: 0.39 in, 17 inches: 0.79 in

^

Always replace pads on both sides of axle if worn.

^

Remove brake caliper before removing

9 - Phillips head screw, 4 Nm

10 - Bolt

^

Only on front wheel drive

11 - Brake pads

^

Thickness 0.43 in without backing plate

^

Wear limit: 2 mm without backing plate

Brakes and Traction Control > Disc Brake System > Brake Caliper > Component Information > Description and Operation > Brakes - Mechanical Components > Page 3964

[PREV PAGE] [NEXT PAGE]