Volkswagen Workshop Manuals
Eos (1F7) V6-3.2L (BUB) (2008)
Brakes and Traction Control > Disc Brake System > Brake Caliper > Component Information > Service and Repair > Removal and Replacement > Page 3982
Brake Caliper Assembly Overview
‹› After replacing brake pads, press the brake pedal firmly several times with the vehicle stationary so that the brake pads are properly seated in their
normal operating position.
‹› Use the brake charger/bleeder unit (VAS 5234) or extraction device (VAG 1869/4) to extract brake fluid from the brake fluid reservoir.
‹› Before removing the brake caliper or disconnecting the brake hose, the brake pedal actuator (VAG 1869/2) must be inserted (this dissipates
FN3 Caliper, 15 Inch
Phillips/Torx screw, 4 Nm
‹› Internally vented, 288 mm diameter.
‹› Thickness: 25 mm.
|[PREV PAGE] [NEXT PAGE]|