Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Eos (1F7) V6-3.2L (BUB) (2008)

Brakes and Traction Control > Disc Brake System > Brake Caliper > Component Information > Service and Repair > Removal and Replacement > Page 3999

Page 23
background image

7 - Protective cap

‹› Pull onto brake carrier and guide pin.

8 - Brake pad with damper

‹› Supplied as pre-assembled replacement part with sufficient grease on guide pins.

‹› If protective caps or guide pins are damaged, install repair kit. Use supplied grease packet to lubricate guide pins.

9 - Protective cap

‹› Pull onto piston with outer sealing lip.

‹› Removing and installing, refer to => [ Brake Caliper Piston ] See: Overhaul. 

10 - Piston with automatic adjustment

‹› Removing and installing, refer to => [ Brake Caliper Piston ] See: Overhaul. 

‹› Apply thin coat of assembly paste (G 052 150 A2 ) to the piston before installing.

11 - Seal

‹› Removing and installing, refer to => [ Brake Caliper Piston ] See: Overhaul. 

Brakes and Traction Control > Disc Brake System > Brake Caliper > Component Information > Service and Repair > Removal and Replacement > Page 3999

[PREV PAGE] [NEXT PAGE]